Rivulis T-Tape 508-12-340
12-inch emitter spacing, 8-mil wall, and 0.34 GPM per 100 ft at 8 psi.
Reel specifications
- Diameter
- 5/8 in. nominal
- Wall thickness
- 8 mil
- Emitter spacing
- 12 in.
- Filtration
- 120 mesh
- Reel length
- 7,500 ft
Flow by pressure
| Pressure | GPM per 100 ft | Zone estimate |
|---|---|---|
| 8 psi | 0.34 | Use 8 psi in calculator |
Maximum run length
Check the length of one line against the manufacturer’s chart.
Published limit
Level ground · 90% uniformity
Rivulis T-Tape US data sheet. The table specifies level ground and 90% uniformity. It gives 8 psi as the flow rating and leaves the run-length test inlet pressure unspecified.
What to check for this reel
Compared with 508-12-220, the spacing and reel length are the same. This version adds 0.12 GPM per 100 ft at 8 psi and lists 120 mesh filtration, compared with 150 mesh for 508-12-220.
Example zone demand
10 rows of 100 ft each would need about 3.40 GPM at the listed 8 psi. Check the flow available under pressure and the manufacturer’s run-length chart for your longest row and slope.
Search the full tape index or see a replacement comparison with fitting and filtration checks.
Sources
- Rivulis T-Tape US data sheet500 and 700 Series tables, by model number · 2019 · checked