Irritec P1 P1-50825-08F-1000
8-inch emitter spacing, 8-mil wall, and 0.54 GPM per 100 ft at 8 psi.
Reel specifications
- Diameter
- 0.635 in. inside diameter
- Wall thickness
- 8 mil
- Emitter spacing
- 8 in.
- Filtration
- 120 mesh
- Reel length
- 1,000 ft
Flow by pressure
| Pressure | GPM per 100 ft | Zone estimate |
|---|---|---|
| 8 psi | 0.54 | Use 8 psi in calculator |
| 10 psi | 0.60 | Use 10 psi in calculator |
What to check for this reel
The 8-inch pink-emitter tape needs 6.0 GPM for ten 100-ft rows at 10 psi. That is 2.0 GPM more than the 12-inch pink-emitter tape over the same total length.
Example zone demand
10 rows of 100 ft each would need about 5.40 GPM at the listed 8 psi. Check the flow available under pressure and the manufacturer’s run-length chart for your longest row and slope.
Search the full tape index or see a replacement comparison with fitting and filtration checks.
Sources
- Irritec USA P1 thin-wall dripline specificationsFlow by pressure and spacing, and 1,000-ft flap-outlet reel table · LIT-P1-07/23 · checked