Irritec P1 specifications and flow rates
Look up Irritec P1 flap-outlet reels and compare the manufacturer’s flow table at 8 and 10 psi.
Scroll the table to see flow, filtration and reel length.
| Manufacturer and model | Diameter | Wall | Spacing | GPM per 100 ft | Filtration | Reel |
|---|---|---|---|---|---|---|
| P1-50817-08F-1000Irritec P1 | 0.635 in. inside diameter | 8 mil | 8 in. | 0.38 at 8 psi0.43 at 10 psi | 150 mesh | 1,000 ft |
| P1-50825-08F-1000Irritec P1 | 0.635 in. inside diameter | 8 mil | 8 in. | 0.54 at 8 psi0.60 at 10 psi | 120 mesh | 1,000 ft |
| P1-50825-12F-1000Irritec P1 | 0.635 in. inside diameter | 8 mil | 12 in. | 0.36 at 8 psi0.40 at 10 psi | 120 mesh | 1,000 ft |
Choosing between the listed models
Irritec lists nominal flow per emitter by color. Its line-flow table also gives GPM per 100 ft by color, pressure and spacing. The index uses the line-flow table for zone sizing.
Read the entire part number when ordering a replacement. The 8-inch and 12-inch versions of the pink emitter have different flow per 100 ft, even though the nominal rate per emitter is the same.
Compare across manufacturers or estimate the demand for a zone.
Sources
- Irritec USA P1 thin-wall dripline specificationsFlow by pressure and spacing, and 1,000-ft flap-outlet reel table · LIT-P1-07/23 · checked