Irritec P1 P1-50825-12F-1000
12-inch emitter spacing, 8-mil wall, and 0.36 GPM per 100 ft at 8 psi.
Reel specifications
- Diameter
- 0.635 in. inside diameter
- Wall thickness
- 8 mil
- Emitter spacing
- 12 in.
- Filtration
- 120 mesh
- Reel length
- 1,000 ft
Flow by pressure
| Pressure | GPM per 100 ft | Zone estimate |
|---|---|---|
| 8 psi | 0.36 | Use 8 psi in calculator |
| 10 psi | 0.40 | Use 10 psi in calculator |
What to check for this reel
For the 12-inch pink-emitter tape, use the published 0.40 GPM per 100 ft at 10 psi in this table. The nominal per-emitter figure and the line-flow table are rounded separately.
Example zone demand
10 rows of 100 ft each would need about 3.60 GPM at the listed 8 psi. Check the flow available under pressure and the manufacturer’s run-length chart for your longest row and slope.
Search the full tape index or see a replacement comparison with fitting and filtration checks.
Sources
- Irritec USA P1 thin-wall dripline specificationsFlow by pressure and spacing, and 1,000-ft flap-outlet reel table · LIT-P1-07/23 · checked